Clogged Toilet Repair – How to Unclog a Clogged Toilet
Sometimes, a clogged toilet is just a symptom of a bigger problem. A leaking toilet, overflowing sink, or sewer backup can also mean corroding pipes need a professional clogged drain repair. These are not only a nuisance but also dangerous and unsanitary. A professional plumber can quickly and effectively fix major blockages and ensure your plumbing system is functioning at its optimal capacity.
A clogged toilet repair service is the first step in the process. Georgetown Plumber will assess the problem and will recommend the appropriate method. The plumber will also be able to give you specific recommendations for maintenance. Before calling in a plumber, you should make sure that you have followed the steps listed above to clear the clog. In some cases, the clogged toilet results from a larger problem.
In most cases, the clog will clear itself with a plunger, but in some cases it may not. If you are unsure of how to use the plunger, you can also try using an auger. A toilet auger is about $20 to $50 and can be bought at most home improvement stores. Before you use the auger, you must insert the cable into the drain pipe. Then, apply pressure to the cable and allow it to extend as far as it can. If you feel the cable dropping into the drain pipe, apply a little extra pressure. This will punch a hole through the clog and allow water to flow into the sewer.
If you do not want to use a plunger, you can try a toilet auger, which can be purchased at most hardware stores for twenty to fifty dollars. The auger has a cable that you insert through the throat of the toilet. To use it, you need to apply pressure to the cable and extend it into the drain pipe. Once the auger has been inserted into the drain, you should be able to feel it drop. A successful clog removal will result in water flowing out of the pipes.
Using a plunger to clear a clogged toilet is the simplest way to fix this problem. It will unclog a small clog in the pipe, so you can try it. If it does not work, you can hire a professional to do the job. If the plunger does not work, you can use a drain auger. A sewer auger is another alternative for a sewer line clogged toilet repair.
Using a snake or an auger to unclog a clogged toilet is a relatively easy task. It is important not to over-flush your toilet, which can cause a leak. Rather, use a plunger to remove the clogged water in the pipe. If you’re not confident with your skills, contact a plumber to get the job done. It is very important to avoid a clogged toilet, and a cracked toilet should be repaired as soon as possible.
The first step to a clogged toilet repair is to buy a toilet auger. This tool can cost anywhere from $20 to $50 and is easily purchased at your local hardware store. You must first pass a cable into the toilet’s throat, then push the auger into the drain. When the auger is pushed into the pipe, you will have to apply extra pressure to get it into the drain. This hole will allow water to flow to the sewer.
Using a snake to unclog a toilet is a great way to deal with a recurring problem. This tool is made to reach a sewer pipe and can help repair a clogged toilet. It can be used to unclog a sewer line, but it should only be used when there is no water in the pipe. Once you find a plumber, you’ll need to call a local emergency plumbing service.
Before hiring a plumber, you should take note of the symptoms of the clogged toilet. Often, a drained toilet is a sign of a problem with the sewer line. Tree roots, construction, and landslides can all damage the pipes. In such a case, it’s best to have a professional plumber come out and solve the problem. If you can’t solve the drained toilet yourself, you can try using a plunger to open it.